MonsterGY6.com, GY6, Uni Air Filter, Installation

_________________________________________________________________________

Uni Air Filter Installation

Let's locate the old air box:
1. Set your scooter on the center stand.
2. Lift the seat and remove the storage compartment.
3. Remove the entire old air box & intake tube, by removing all the bolts, as well as loosening the clamp around the carburetor intake.
4. Simply mount the new UNI air filter directly to the carburetor intake (1.75" for 150cc and 1.5" for 50cc)
5. When you removed the original air box, there may be some vent tubes that were plugged into it, don't worry, just cable tie those loose hoses securely to the frame.
6. We do recommend re jetting the carburetor as well.
Congratulations, you have installed your new Uni air filter!